CareFusion Alaris 8015 User Manual page 8

Instruments are tested and calibrated before they are
packaged for shipment. To ensure proper operation after
shipment, it is recommended that an incoming inspection be
performed before placing the instrument in use.
Prior to placing the Alaris System in use:
1. Perform check-in procedure using System Maintenance
software.
2. Whether or not Profiles feature has been enabled
(see PC unit section, "System Options," "System

Configurations").
NOTE:
To enable the Profiles feature, a hospital-defined best-practice

Data Set must be uploaded to the PC unit.
viii
Installation
Alaris ™ System User Manual – with v9.17 Model 8015