Add Module While System Is Powered On; Start-Up; Power On System - CareFusion Alaris 8015 User Manual

Add Module While System is Powered On

Add module as described in "Attach Module."
• System tests module, causing all LED segments and
indicator lights of displays to illuminate briefly.
• Appropriate module identification display (A, B, C, or D)
illuminates. Modules are always labeled left to right, so if
a module is added to left of other modules, all modules are
reidentified. Module reidentification does NOT interrupt or
affect infusion or monitoring on active modules.
• Module positions (A, B, C, or D) appear on Main Display.
• If any of the following conditions are observed, affected
module must be removed from use and inspected by
qualified personnel:
◦ LED segments are not illuminated on displays during
power-on test.
◦ Indicator lights do not illuminate.
◦ Appropriate module identification does not appear.
1. Connect PC unit to an external AC power source.
2. Press
SYSTEM ON
3. System self test begins:
• Diagnostics test causes all LED display segments
and Status Indicator lights of attached module(s) to
illuminate briefly.
• Power Indicator illuminates.
• Appropriate module identification (A, B, C, or D) is
displayed on attached module(s).
• An audio tone sounds.
• If PM Reminder option is enabled and scheduled
preventive maintenance is due,
screen appears.
REMINDER
• At completion of system-on test,
appears.
™
Alaris System User Manual – with v9.17 Model 8015
PC Unit Section
Attach and Detach Module (Continued)

Start-Up

Power On System

key.
MAINTENANCE
screen
New Patient?
1-5