Factory Reset; Restore To Factory Default Via Lcd Menu; Restore To Factory Default Via The Web Gui; Change Log - Grandstream Networks WP810 Series Administration Manual

program will download a generic cfg.xml file. The configuration file name should be in lower case letters.
For more details on XML provisioning, please refer to the following document:
https://documentation.grandstream.com/knowledge-base/sip-device-provisioning-guide/

FACTORY RESET

Restore to Factory Default via LCD Menu

Warning
Restoring the Factory Default Settings will delete all configuration information on the phone. Please backup or print all the
settings before you restore to the factory default settings. Grandstream is not responsible for restoring lost parameters and
cannot connect your device to your VoIP service provider.
There are two methods to restore the WP810/WP822/WP825 to the factory default settings.
1. On WP810/WP822/WP825 idle screen, go to Settings
2. In the new window, confirm the reset using the left softkey.
3. Once confirming the factory reset, the phone will reboot with the default factory settings.

Restore to Factory Default via the Web GUI

1. Login WP810/WP822/WP825 Web GUI and go to Maintenance
2. Click on the Start button in front of Factory Reset.
3. A dialog box will pop up to confirm factory reset.
4. Click OK to restore the phone to factory settings.

CHANGE LOG

This section documents significant changes from previous firmware versions. Only major new features or major document
updates are listed here. Minor updates for corrections or editing are not documented here.
Firmware Version 1.0.11.28
�� Advanced Settings
Figure 19: LCD – Confirm Factory Reset
��
Figure 20: Web GUI – Factory Reset
Figure 21: Web GUI – Confirm Factory Reset
�� Factory reset.
Tools.