Grandstream Networks WP810 Series Administration Manual page 47

Firmware
Defines the server path for the firmware server.
Server Path
Firmware
Server The username for the firmware server.
Username
Firmware
Server The password for the firmware server.
Password
Firmware File Enables your ITSP to lock firmware updates. If configured, only the firmware with the matching encrypted
Prefix prefix will be downloaded and flashed into the phone.
Firmware File Enables your ITSP to lock firmware updates. If configured, only the firmware with the matching encrypted
Postfix postfix will be downloaded and flashed into the phone.
Maintenance/Syslog
If set to SSL/TLS, the syslog messages will be sent through secured TLS protocol to syslog server.
Syslog
Default setting is UDP.
Protocol
Note: The CA certificate is required to connect with the TLS server.
The URL or IP address of the syslog server for the phone to send syslog to.
Syslog Server
Note: By adding port number to the Syslog server field (i.e. 172.18.1.1:1000), the phone will send syslog to
the corresponding port of that IP.
Selects the level of logging for syslog.
The default setting is "None". There are 4 levels: DEBUG, INFO, WARNING and ERROR.
Syslog messages are sent based on the following events:
Product model/version on boot up (INFO level).
NAT related info (INFO level).
sent or received SIP message (DEBUG level).
Syslog Level
SIP message summary (INFO level).
inbound and outbound calls (INFO level).
registration status change (INFO level).
negotiated codec (INFO level).
Ethernet link up (INFO level).
SLIC chip exception (WARNING and ERROR levels).
Memory exception (ERROR level).
Syslog
Syslog will be filtered based on keywords provided. If you enter multiple keywords, it should be separated
Keyword
by ','. Please note that no spaces are allowed.
Filtering
Table 33: Maintenance/Upgrade and Provisioning