Grandstream Networks WP810 Series Administration Manual page 30

Ignore Alert-Info header
Use Privacy Header
Use P-Preferred- Identity
Header
Use P-Access-Network-
Info Header
Use P-Emergency-Info
Header
Use MAC Header
Add MAC in User-Agent
PUBLISH for Presence
Omit charset=UTF-8 in
MESSAGE
Feature Key
Synchronization
Special Feature
The default setting is "No".
This option is used to configure default ringtone. If set to "Yes", configured default ringtone
will be played.
The default setting is "No".
Custom SIP Headers
Controls whether the Privacy header will present in the SIP INVITE message or not, whether
the header contains the caller info. When set to "Default", the Privacy Header will show in
INVITE only when "Huawei IMS" special feature is on. If set to "Yes", the Privacy Header will
always show in INVITE. If set to "No", the Privacy Header will not show in INVITE.
Default setting is "Default".
Controls whether the P-Preferred-Identity Header will present in the SIP INVITE message. The
default setting is "default": The P-Preferred-Identity Header will show in INVITE unless
"Huawei IMS" special feature is on. If set to "Yes", the P-Preferred-Identity Header will always
show in INVITE.
If set to "No", the P-Preferred-Identity Header will not show in INVITE.
Enables / disables the use of P-Access-Network-Info header in SIP request. When disabled,
the SIP message sent from the phone will not include the selected header.
Default setting is "No".
Enables / disables the use of P-Emergency-Info header in SIP request. When disabled, the SIP
message sent from the phone will not include the selected header.
Default setting is "No".
If set to "Only for REGISTER", only the SIP message for register and unregister will contain the
MAC header.
If set to "Yes to All SIP", all the outgoing SIP messages will contain the MAC header.
If set to "No", MAC header will not be contained in any outgoing SIP message.
If set to "Yes except REGISTER",
all outgoing SIP messages will include the phone's MAC address in the User-Agent header,
except for REGISTER and UNREGISTER.
If set to "Yes to All SIP", all outgoing SIP messages will include the phone's MAC address
in the User-Agent header.
If set to "No", the phone's MAC address will not be included in the User-Agent header in
any outgoing SIP messages.
Advanced Features
Enables Presence feature on the phone.
Omit charset=UTF-8 in MESSAGE content-type
When enabled, DND and Call Forward features can be synchronized with Broadsoft server.
Note: When using this feature, Special Feature needs to be set to BroadSoft.
Default is "Disabled"
Different soft switch vendors have special requirements. Therefore, users may need select
special features to meet these requirements. Users can choose from Standard, Nortel MCS,
Broadsoft, CBCOM, RNK, Sylantro, Huawei IMS, PhonePower and UCM Call center depending
on the server type.
The default setting is "Standard".
Session Timer