Grandstream Networks WP810 Series Administration Manual page 45

Disable
Firmware Disables the Firmware Upgrade confirmation popup.
Upgrade Set to "No" by Default.
Confirmation
Validate
Hostname in To validate the hostname in the SSL certificate
Certificate
Allow DHCP Default setting is "Yes". DHCP option 66 originally was only designed for TFTP server. Later on it was
Option 43 extended to support an HTTP URL. WP phones support both TFTP and HTTP server via option 66. Users
and Option can also use DHCP option 43 vendor specific option to do this.
66 Override DHCP option 43 approach has priorities. The phone is allowed to fall back to the original server path
Server configured in case the server from option 66 fails.
When enabled, users could select Option 150 or Option 160 to override the firmware server instead of
Additional
using the configured firmware server path or the server from option 43 and option 66 in the local
Override
network. Please note this option will be effective only when option "Allow DHCP Option 43 and Option 66
DHCP Option
to Override Server" is enabled. The default setting is "None".
Allow DHCP
Option 120 to Enables DHCP Option 120 from local server to override the SIP Server on the phone. The default setting is
override SIP "No".
Server
3CX Auto Phone will multicast SUBSCRIBE for provision.
Provision The default settings is "Yes".
Enables automatic upgrade and provisioning.
Automatic
Upgrade
The default setting is "No".
Randomized
Randomized Automatic Upgrade within the range of hours of the day or postpone the upgrade every X
Automatic
minute(s) by random 1 to X minute(s).
Upgrade
Hour of the Defines the hour of the day to check the HTTP/TFTP/FTP server for firmware upgrades or configuration
Day (0-23) files changes. The default value is 1.
Day of the Defines the day of the week to check HTTP/TFTP/FTP server for firmware upgrades or configuration files
Week (0-6) changes. The default value is 1.
Disable SIP
Device will not challenge NOTIFY with 401 when set to "Yes".
NOTIFY
Authenticatio
Default setting is "No".
n
Config
Config Allows users to choose the config upgrade method: TFTP, FTP, FTPS, HTTP or HTTPS. The default setting is
"HTTPS".
Upgrade Via
Config Server
Defines the server path for provisioning.
Path
Config Server
The username for the config server.
Username