Grandstream Networks WP810 Series Administration Manual page 42

OpenVPN® Enable
OpenVPN® mode
OpenVPN® Server Address
OpenVPN® Port
OpenVPN® Transport
OpenVPN® CA
OpenVPN® Certificate
OpenVPN® Client Key
OpenVPN® TLS Key
OpenVPN® Cipher Method
OpenVPN® Username
OpenVPN® Password
OpenVPN® Comp-lzo
Additional Options
Network/Wi-Fi Settings
Enables/Disables OpenVPN® feature. Default is "No".
Selects OpenVPN® mode:
● Simple Mode: The options below will be visible and the administrator needs to
configure them manually.
● Expert Mode: Only "Upload OpenVPN® config file" will be available. The
administrator can upload the config file.
Default is "Simple Mode"
Specify the IP address or FQDN for the OpenVPN® Server.
Specify the listening port of the OpenVPN® server. The valid range is 1 – 65535.
The default value is "1194".
Specify the Transport Type of OpenVPN® whether UDP or TCP.
The default value is "UDP".
Click on "Upload" to upload the Certification Authority of OpenVPN®. For a new
upload, users could click on "Delete" to erase the last certificate, and then upload a
new one.
Click on "Upload" to upload OpenVPN® certificate. For a new upload, users could
click on "Delete" to erase the last certificate, and then upload a new one.
Click on "Upload" to upload OpenVPN® Key.
For a new upload, users could click on "Delete" to erase the last certificate, and then
upload a new one.
Specifies the Cipher method used by the OpenVPN® server. The available options
are:
● Blowfish
● AES-128
● AES-256
● Triple-DES
The default setting is "Blowfish".
Configures the optional username for authentication if the OpenVPN server
supports it.
Configures the optional password for authentication if the OpenVPN server supports
it.
Note: Please use this option with caution. Make sure that the options are
recognizable by OpenVPN® and do not unnecessarily override the other
configurations above.
Additional options to be appended to the OpenVPN® config file, separated by
semicolons. For example, comp-lzo no;auth SHA256