Grandstream Networks WP810 Series Administration Manual page 48

Configures whether the SIP log will be included in the syslog messages. The default setting is "No".
Send SIP Log
Note: By setting Send SIP Log to Yes, the phone will still send SIP log from syslog even when Syslog Level
set to NONE.
Capture
Status Shows the status of the capture.
Defines the location where the capture will be stored. Available choices for location are Internal Storage or
Capture
USB.
Location
Default setting is Internal Storage.
Sets the capture mode. Either set to Timed mode or continuous.
• Timed Mode: When a new capture is running, the previous files are deleted. Capture Timer is optional, if
Capture
Internal Storage is selected, the maximum Capture Timer limit is 30 minutes.
Mode
• Continuous Mode: This mode allows device to capture logs continuously during the days set under
Continuous Capture Days option.
Capture If Capture Mode is set to "Timed" this field will appear to specify how long to capture syslog in minutes. 0
Timer is unlimited. Internal capture has a 30-minute maximum limit.
Rotation is always enabled when capturing internally.
Log File
Log File Rotation will maintain a fixed maximum limit of the file size based on the Max Log File Size and
Rotation
Max Log Files configured. Old logs will be deleted when rotated.
Max Log File
The maximum log file size used when rotation is enabled
Size
Max Log Files The number of log files used when rotation is enabled
Maintenance/TR-069
Sets the phone to enable the "CPE WAN Management Protocol" (TR-069). The default setting is
Enable TR-069
"Yes".
Specifies URL of TR-069 ACS (e.g., http://acs.mycompany.com), or IP address.
ACS URL
The default setting is https://acs.dgms.cloud
TR-069 Username Specifies the username to authenticate to ACS.
TR-069 Password Specifies the password to authenticate to ACS.
When enabled, periodic inform packets to ACS server will be sent.
Periodic Inform
Enable
The default setting is "Yes"
Table 34: Maintenance/Syslog