Grandstream Networks WP810 Series Administration Manual page 49

Cordless wi-fi ip phone
Hide thumbs Also See for WP810 Series:
Table of Contents

Advertisement

Configures periodic inform interval to send the inform packets to TR-069 Auto Configuration
Periodic Inform
Server.
Interval
The default setting is 86400
Connection Request
Specifies the username for the ACS to connect to the phone.
Username
Connection Request
Specifies the password for the ACS to connect to the phone.
Password
Connection Request
The port for the ACS to connect to the phone.
Port
CPE SSL Certificate
Uploads Cert File for the phone to connect to the ACS via SSL.
CPE SSL Private Key
Uploads Cert Key for the phone to connect to the ACS via SSL.
Randomized TR069
When enabled, TR069 will send out first INFORM message to server on randomized timing
Startup
between 1 to 3600 seconds after phone boots up.
Maintenance/Security Settings
Security
Configures the access control for the users to configure from the keypad Menu. There are four different
options:
● Unrestricted: All the options can be accessed in the keypad Menu.
● Basic settings only: Account settings, Network, and Advanced Settings are hidden from the keypad
Configuration
menu.
via Keypad
● Basic settings & Network settings: Only basic settings, call features, and network settings can be
Menu
available in LCD Menu.
● Constraint Mode: The phone will require an administrator password to change Wireless & network and
Advanced Settings and to access the Call Settings menu along with the DND toggle function.
● Locked Mode: The phone menu is disabled.
The default setting is "Unrestricted".
Allows Factory Reset under certain security constraints.the options available are 
● Default
Factory Reset
● Always Require Passsword
Security Level
● No Password required
The default value is "Default" which will not require any password upon factory reset.
After enabling this feature, the phone will validate the server's certificate. If the server that our phone tries
Validate
to register on is not on our list, it will not allow the server to access the phone.
Server
Certificates
Note: New Digicert certificates have been integrated and supported since firmware 1.0.11.28
SIP TLS
SSL Certificate used for SIP Transport in TLS/TCP.
Certificate
SIP TLS
SSL Private key used for SIP Transport in TLS/TCP.
Private Key
Table 35: Maintenance/TR-069

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wp822 seriesWp825 series

Table of Contents