Grandstream Networks WP810 Series Administration Manual page 43

Country Selects the country code for the Wi-Fi settings.
SSID 1-20
Wi-Fi name
SSID
Enabled Enable/Disable SSID
Hidden Specifies if it is a Hidden SSID
Security
This parameter defines the security mode used for the wireless network when the SSID is hidden. 3 Modes
are available:
– WEP
– WPA/WPA2 PSK
Security
Type
– WPA/WPA2 Enterprise: This feature allows using 802.1x WPA2-Enterprise secure network
authentication.
– WPA3 PSK.
– WPA3 Enterprise.
Password Password to access Wi-Fi Network
802.11r This feature allows user to use 802.11r. The default setting is Disabled.
Network
Selects which Internet protocol to use. When both IPv4 and IPv6 are enabled, phone attempts to use
Internet
preferred protocol first and switches to the other choice if it fails.
Protocol
Select the address mode for the IPv4 Address obtained on the phone.
Default is "DHCP". If set to "Static", additional information will be required:
IPv4 Static Address
IPv4 Address
Subnet Mask
Gateway
DNS server 1 & 2
Preferred
Enter the Preferred DNS server.
DNS Server