It Security; Product Description; Installation; Mounting The Measuring Device - Endress+Hauser Proline 100 Modbus RS485 Brief Operating Instructions

Proline 100 Modbus RS485
2.6

IT security

We only provide a warranty if the device is installed and used as described in the Operating
Instructions. The device is equipped with security mechanisms to protect it against any
inadvertent changes to the device settings.
IT security measures in line with operators' security standards and designed to provide
additional protection for the device and device data transfer must be implemented by the
operators themselves.
3

Product description

The device consists of a transmitter and a sensor.
The device is available as a compact version:
The transmitter and sensor form a mechanical unit.
Applies for Promass, Cubemass, CNGmass, LNGmass and LPGmass
If a device with Modbus RS485 intrinsically safe is ordered, the Safety Barrier Promass 100 is
part of the scope of supply and must be implemented to operate the device.
For detailed information on the product description, see the Operating Instructions for
the device
4

Installation

For detailed information about mounting the sensor, see the Sensor Brief Operating
Instructions →  3
4.1

Mounting the measuring device

4.1.1 Turning the display module
The local display is only available with the following device version:
Order code for "Display; operation", option B: 4-line; illuminated, via communication
The display module can be turned to optimize display readability.
Endress+Hauser
Product description
9