Setting Operating Mode - Gira 1289 00 Operating Instructions Manual

Setting operating mode

The switching actuator can be used in five
different operating modes:
• Schalten (Switching, see Page 12)
• Timer/sek. (Timer/sec., see Page 14)
• Timer/min. (Timer/min., see Page 16)
• Impuls (Pulse, see Page 18)
• Türöffner (Door opener, see Page 20)
Proceed as follows to select the desired
operating mode:
1. Start programming mode at the
control unit by pressing the "System-
progr." button for 3 seconds until the
LED next to the button starts flashing.
✓ The LED of the last set operating mode
flashes at the switching actuator.
2. Press the "Funktion" button at the
switching actuator several times until
the LED of the desired operating mode
flashes.
3. Press the "Systemprogr." button at the
control unit to exit operation-selection
mode of the switching actuator.
✓ The last set operating mode is acti-
vated.
9