Gira 1289 00 Operating Instructions Manual page 27

✓ The LED of the last set operating mode
flashes at the switching actuator.
2. Press the "Funktion" button at the
switching actuator several times until
the "Timer/sek." LED flashes.
3. Press the "Progr." button at the swit-
ching actuator for 3 seconds until the
LED flashes.
4. Press the call button at the door sta-
tion for 3 seconds until you hear a
short acknowledgement tone.
✓ A long acknowledgement tone con-
firms successful assignment.
5. Briefly press the "Progr." button at the
switching actuator to exit program-
ming mode of the switching actuator.
6. Press the call button at the door sta-
tion again for 3 seconds until you hear
a short acknowledgement tone.
7. Press the
station for 3 seconds until you hear a
short acknowledgement tone.
✓ A long acknowledgement tone con-
firms successful assignment.
8. Press the "Systemprogr." button at the
control unit to exit programming
mode.
button at the home
27