Analysis Of Test Strips; How To Perform A Measurement - Macherey-Nagel URYXXON Relax User Manual

Hide thumbs Also See for URYXXON Relax:

Table of Contents

5. Analysis of test strips

The URYXXON

Relax is very easy to use. In order to start the measurement,

the test strip is placed on the strip holder. The instrument automatically detects

a new strip and starts the measurement. A progress bar appears, that indicates

the remaining analysis time. After 30 seconds the test strip is drawn into the

instrument.

NOTE:

Make sure to remove excess urine by blotting the test strip carefully on a lint-

free cloth.

NOTE:

If auto mode (Chapter 9.5 "How to deactivate and activate the autostart") is

deactivated, the analysis needs to be started by pressing

screen.

After the measurement, the instrument will release the analyzed test strip which

can now be discarded. The result is displayed on the screen and is transferred

via the interfaces and/or printed according to equipment settings.

For additional information on the test strip, please read the instruction leaflet that

comes with the strips.

DANGER:

Urine and used test strips bare the danger of infection. Always use protective

gloves during handling and disposal. The disposal of used test strips should

be performed according to the regulations of the handling of potentially infec-

tious material.

Manual URYXXON

Relax EN, V5.00 / 04.19

Relax

on the touch-

Table of Contents