Scaleo medical Poweo 140 Quick Up User Manual page 11

Do some rotational tests before using with a patient
Step 8: Slide the battery into its compartment.
Before using the Poweo
button is on "OFF" position. Turn the button clockwise to
release it.
Position the battery on the support, and guide it for
the best electrical contact between the battery and
battery support contacts.
Step 9: Connect the remote control.
Connect the remote control with the plug and make sure that the wire
connection is aligned with the mast remote control port. Once aligned,
press on the wire to insert the plug.
Step 10: Test the lifter
Try lifting and lowering, opening and closing the legs to make sure that everything is in order.
Step 11: Remove the battery and recharge it.
DOMU125_EN_v3_20221205_Poweo ® Quick Up user manual
® make sure that the emergency
ON position of the
emergency button: the
lifter is not powered
OFF position of the
emergency button: the
lifter is powered
11