Scaleo medical Poweo 140 Quick Up User Manual page 20

Set the lifter so that the back of the patient is in contact with the back of the chair.
2.
Place the suspension above the user until the lower edge of the foam is approximately 2
3.
cm above the thighs of the patient.
Position the foams around the chest of the patient and ensure that they remain far
4.
enough below the armpits.
Avoid placing them too high under the armpits
of the patient or too far in front or behind the
arms of the patient. The arms of the patient
must always remain outside of the suspension.
Lift one leg of the patient and slide the thigh support in place, either high on the thigh
5.
near the groin or half way along the thigh. Repeat the
procedure with the other leg.
Depending on the chosen position of the thigh support there
will be more or less weight to be carried by the foams. When
the thigh supports are relatively high, there will be less
weight on the foams. When the thigh supports are in a lower
position, there will be more weight on the foams.
Adjust the length of the thigh sling so that the legs of the patient are lifted
6.
simultaneously with the torso.
The selected position of the thigh slings and thigh supports directly affects the comfort
of the patient.
proceeding to the transfer.
Using the remote control, lift the patient for a second, by pressing the "UP" button.
7.
Ensure the suspension is well positioned around the patient and the patient is
8.
comfortable. Repeat points 1 to 4 if necessary.
Lift the patient until the feet are over of the floor.
9.
20
Please make sure the patient is comfortably positioned before
DOMU125_EN_v3_20221205_Poweo® Quick Up user manual