Table of Contents
Advertisement
Understanding the information of the remote control
The maintenance LED indicator is used to indicate a possible malfunction
AND the periodic inspection status. Therefore, it can display multiple consecutive status.
Example: in
case
LED displays alternately flashing RED and solid ORANGE.
Managing the maintenance LED status is easy:
•
Continuous solid light = default.
•
The light is continuous and the lifter is not operating = main fuse replacement is
necessary.
•
Flashing light = periodical inspection management.
According to the EN 10535 standards the time period between periodical inspection default
values is 12 months. The periodical inspection time setting can be changed using the Poweo®
service tool software.
BATTERY LED
●
– Solid green = more than 10 cycles are
still possible.
●
– Solid red : = less than 10 cycles left
before battery empty status.
●
– Flashing red : battery alarm (only one
cycle left before the battery is completely
empty).
Transferring with the Poweo
Lifting and transferring from a sitting position
If the patient is sitting in a wheelchair, make sure to activate
1.
the brakes.
DOMU125_EN_v3_20221205_Poweo ® Quick Up user manual
of
default AND periodical inspection
●
– Solid orange : default. Use the Poweo
service tool software or call us for
maintenance.
●
– Flashing orange: periodic inspection must
be performed within 2 months.
●
– Flashing red: periodic inspection has not
been performed in time.
®
140 -180 Quick Up
date
exceeded, the
MAINTENANCE LED
®
19
Advertisement
Table of Contents
