NEC BladeServer Express5800 Series User Manual page 76

See the table below for the options and their descriptions:
Option Parameter
Set User Up to 7
Password alphanumeric
characters
Set Supervisor Up to 7
Password alphanumeric
characters
Password on [Disabled]
boot Enabled
Secure Mode [Disabled]
Timer 1 min
2 min
5 min
10 min
20 min
60 min
120 min
Hot Key [L]
(CTRL+ALT+) Z
Secure Mode [Disabled]
Boot Enabled
Power Switch [Disabled]
Inhibit Enabled
IMPORTANT:
who has no user password.
In Secure Mode, the POWER switch, DUMP switch, keyboard, and
mouse are disabled, and the ScrollLock, CapsLock, and NumLock
lamps on the keyboard flash sequentially.
To exit Secure Mode, enter the user password.
Description
Press Enter to display the User password
entry screen. With a User password, the
available SETUP menus are restricted. This
option is available only if the Supervisor
password is set.
Press Enter to display the Supervisor
password entry screen. With the Supervisor
password, all SETUP menus are available.
This option is available only when you log
into the SETUP utility with the Supervisor
password.
Specify whether to request password entry
on boot. User password setup is required
beforehand. When the supervisor password
is specified and this option is disabled, the
BIOS assumes that a boot attempt is made
by a user.
It gives priority to "Secure Mode Boot" when
"Secure Mode Boot" and "Password on boot"
are both enabled.
Specify the idle for the system to enter
Secure Mode. If this item is set to [Disabled],
the timer is unavailable.
Specify the key to enter Secure Mode. Press
the selected key while pressing Ctrl and Alt
to enter Secure Mode.
Specify whether the system starts in Secure
Mode or not.
Specify whether the POWER switch of the
CPU blade is enabled or disabled. If
Enabled, the POWER switch cannot be used
to power off the CPU blade. The forced
shutdown procedure (pressing the POWER
switch for at least 4 seconds) is still available.
Secure Mode is used to restrict the access of a user
Configuring Your Server 4-19
Your Setting
[ ]: Factory-set