NEC BladeServer Express5800 Series User Manual page 72

Peripheral Configuration
Select "Peripheral Configuration" on the Advanced menu to display the following screen:
See the table below for the options and their descriptions.
IMPORTANT:
requests or the base I/O addresses. If an assigned value is already used
by another resource, it appears in yellow. A yellow value must be
reassigned.
Option
Serial Port B
Base I/O Address
Interrupt
Make sure to avoid any conflicts in the interrupt
Parameter Description
Disabled Specify whether serial port B is
enabled or disabled.
[Enabled]
3F8h Specify the base I/O address for serial
port B.
[2F8h]
3E8h
2E8h
[IRQ 3] Specify the interrupt for serial port B.
IRQ 4
Configuring Your Server 4-15
Your Setting
[ ]: Factory-set