NEC BladeServer Express5800 Series User Manual page 67

4-10 Configuring Your Server
Advanced
Move the cursor onto "Advanced" to display the Advanced menu.
Selecting a menu item preceded by the symbol "►
See the table below for the options and their descriptions:
Option
Boot-time
Diagnostic Screen
Reset
Configuration Data
NumLock
Memory/Processor
Error
Parameter Description
[Disabled] Specify whether the self-diagnosis (POST)
screen is displayed or not at boot.
Enabled
If this item is set to "Disabled," the "NEC"
logo appears during POST (pressing Esc
displays the POST screen).
[No] Set this item to "Yes" to clear the
configuration data (system information
Yes
stored by POST). The parameter is changed
to "No" after the system is booted.
On Specify whether the NumLock feature is
enabled or disabled.
[Off]
[Boot] The boot up operation pauses at the end of
POST if a memory or CPU error occurs.
Halt
and pressing Enter displays the submenu.
"
Your Setting
[ ]: Factory-set