NEC BladeServer Express5800 Series User Manual page 127

4-70 Configuring Your Server
Setting Hot Spare Disk
Described below are procedures based on assumption:
Add a HDD to a RAID5 virtual disk configured with three HDDs and assign a newly added HDD as
Hot Spare Disk.
1.
Start WebBIOS.
Make sure that the status for the added HDD is indicated as "UNCONF GOOD" in the
right frame of the top menu.
2.
Select "PD3" (newly connected HDD) in [Physical Drives].
3.
The properties for Physical Drive is displayed.