Internal View - NEC BladeServer Express5800 Series User Manual

Internal View

CPU Unit
1
12
11
1 Lithium battery
2 DIMM socket
#1, #5, #9, #2, #6, #10, #11, #7, #3, #12, #8, #4 from top
3 Heat sink
Install the processor #1 (CPU #1) below this heat sink.
4 Type II mezzanine slot
Slot to install mezzanine card .
5 Type I mezzanine slot
Slot to install mezzanine card .
6 MP connector
Used to connect with the midplane in the Blade Enclosure.
7 MAC address label
8 Connector for signal cable (2)
8-1 Connect the signal cable (2)-A of the storage unit.
8-2 Connect the signal cable (2)-B of the storage unit.
9 Dummy heat sink
Install the processor #2 (CPU #2) below this heat sink.
10 Connector for signal cable (1)
Connect the signal cable (1) of the storage unit.
11 SUV connector
12 Eject lever
2 3
10 9
General Description 2-7
4 5
8-2 8-1
6
7