Product Safety - Beko HTV8716XWST User Manual

a
WARNING!
• Unplug the product when
not in use.
• Never touch the plug with wet
hands! Never pull the plug out
of the socket by pulling on the
cable, always pull it out by
grasping the plug.
• Unplug the product from
the wall outlet during
installation, maintenance,
cleaning and repair work.
• Do not make connections via extension
cords or multi-way plugs.
C
INFORMATION
• This product is designed to
resume operation in the event
of a power resumption after a
power failure. If you want to
cancel the program, see
paragraph "Cancelling a
program".

1.1.2 Product Safety

B
DANGER!
• Never open the loading door or remove
the filter while there is still water in
the drum. Otherwise, there is a risk of
flooding and injury from hot water.
a
PAY ATTENTION!
• The water supply and drain hoses
must be securely attached and
undamaged. Otherwise, water
may leak out.
4 / NL
C
INFORMATION
• Do not open the locked loading door by
force. The door will open immediately
after the wash cycle has finished. If
the machine is not sufficiently cooled
at the end of the program, the
loading door cannot be opened.
Wait for the product to cool
down. If the door still does not
open, apply the solutions given
for 'Loading door cannot be
opened' in the
'Troubleshooting' chapter. Do
not try to force the loading door
to open. The loading door and
locking mechanism may be
damaged.
• In the location where this product is
installed, there should be no doors
with a lock, latch or hinge that
prevent the loading door from
opening fully.
• Follow the instructions on the fabric label
and detergent pack.
• Only use detergents, fabric softeners
and supplements that are suitable
for washing machines.
• Do not install or leave the
product where it could be
exposed to outdoor
conditions.
• Do not play with product
controls.
Washer Dryer / User Manual