Table of Contents
Advertisement
3.6 Adjust legs
a
PAY ATTENTION!
• Adjust feet so that the product
is balanced where it will be
used.
• Balance the machine by
adjusting the legs.
• Check that there is no slack
through the product from the
top diagonal edges.
• Otherwise, the product may move and
cause compression, noise and
vibration problems.
• Do not use any tools to loosen the lock
nuts. Otherwise the lock nuts may be
damaged.
a) Loosen the locknuts on the legs by hand.
b) Adjust the legs until the product is level
and stable.
c) Retighten all locknuts by hand.
3.7 Electrical connection
Connect the product to a grounded outlet
protected by a 16 amp fuse. Our company is not
responsible for damage resulting from using the
product without grounding in accordance with
local regulations.
• The connection must comply with
national regulations.
14 / NL
• The wiring for the electrical outlet circuit
must meet the requirements of the
appliance. It is recommended to use a
residual current circuit breaker.
• The power cord plug should be
within easy reach after installation.
• If the current rating of the fuse or circuit
breaker in the home is less than 16 amps,
have a qualified electrician install a 16 amp
fuse.
• The voltage stated in the
"Technical specifications" must be
the same as the mains voltage.
B
DANGER!
• A damaged power cord must be
replaced by an authorized service
technician.
3.8 Transporting the product
1 Unplug the product before transporting it. 2
Remove the water drain and
water supply connections.
3 Drain all water that gets into the product
has been left behind. See 6.5 4
Install the transit bolts in
reverse order of disassembly procedure.
See 3.3.
DANGER!
• Your product is too heavy for one
person to carry.
• Your product is heavy; two people
need to carry it and extra
take precautions on stairs. If your
product falls on you, it may cause
injury.
a
PAY ATTENTION!
• Packaging material is dangerous
for children. save all
packaging materials in a safe place
out of the reach of children.
C
INFORMATION
• Never move the product without
properly fastening the transit bolts!
Washer Dryer / User Manual
Advertisement
Table of Contents
