IBM ServeRAID User Reference page 130

Complete the following steps to configure arrays and logical drives:
Figure 36. "Create arrays" window
114
IBM ServeRAID: User's Reference, Version 5.10
1. Click (Configure RAID) on the toolbar. The Configuration wizard opens.
2. In the ServeRAID Manager tree, click the ServeRAID controller that you want
to configure.
3. Click Custom configuration.
4. Click Next. The "Create arrays" window opens.
5. Click the appropriate Array tab in the right panel; then, from the ready drives
list, select the drives that you want to move to the array.