IBM ServeRAID User Reference page 85

This choice deletes the existing configuration information; that is, it deletes all
logical drives defined for the controller and sets all functional physical drives
attached to the controller to the ready state.
v Copy the Configuration from Drives to Controller reads the most common
configuration from the drives in the server and copies it to the ServeRAID
controller.
v Configure BIOS Settings is used to modify the following BIOS settings for the
ServeRAID controller:
– BIOS support for startable CDROM
– BIOS support for INT13 extensions
– BIOS support for reading partition tables
– Bypass read/verify operations
– BIOS compatibility mapping
– Override temporary write through
– Load ServeRAID BIOS default settings
– Save configuration to the ServeRAID controller
v View Controller and PCI Information shows the ServeRAID controller hardware
and PCI register information.
v Exit is used to exit from the current menu to the previous menu.
Chapter 7. Using the ServeRAID Mini-Configuration program
69