Pppoe Is Off - Cayman Systems 2E-H-W User Manual

PPPoE is Off

Configuring Your Cayman 2E-H-W
3-20
configure this information if the Cayman 2E-H-W cannot determine
its Ethernet Port B configuration information from a DHCP server on
your wide area network.
To display the Ethernet Port B (WAN) Configuration window (Figure
3-8), click the Ethernet B (WAN) button on the Cayman 2E-H-W
Home Page.
Figure 3-8 Ethernet Port B (WAN) Configuration Window
To configure settings for the WAN (Ethernet B) port:
1. Enter the IP address of the Cayman 2E-H-W's WAN
Ethernet port in the Local Address field.
If you want to specify the IP address for Ethernet Port B, make
sure you enter an address that is not being used by another
device on your network.
If you want your Cayman 2E-H-W to acquire the IP address for its
WAN port from a DHCP server on your wide area network, enter
.
0.0.0.0
Cayman 2E-H-W User's Guide
November 2000