Cayman Systems 2E-H-W User Manual page 92

Using the Command Line Interface
4-34
Basic PPP Settings
set PPP module option { on | off }
Enables or disables PPP on the Cayman 2E-H-W. By default, PPP is
turned off.
set PPP module mru integer
Specifies the Maximum Receive Unit setting for the PPP interface.
The argument can be any number between 128 and 2048.
integer
By default, the MRU value for PPP over Ethernet is 1492.
set PPP module magic-number { on | off }
Enables or disables LCP magic number negotiation. By default, magic
number negotiation is turned on.
set PPP module protocol-compression { on | off }
Specifies whether you want the Cayman 2E-H-W to compress the
PPP Protocol field when it transmits datagrams over the PPP link. By
default, protocol field compression is turned off.
set PPP module lcp-echo-requests { on | off }
Specifies whether you want your Cayman 2E-H-W to send LCP echo
requests. By default, LCP echoing is turned on. You should turn off
LCP echoing if you do not want the Cayman 2E-H-W to drop a PPP
link to a nonresponsive peer.
set PPP module failures-max integer
Specifies the maximum number of Configure-NAK messages the PPP
module can send without having sent a Configure-ACK message. The
argument can be any number between 1 and 20. The default
integer
value for the maximum failure count is 10.
set PPP module configure-max integer
Specifies the maximum number of unacknowledged configuration
requests that your Cayman 2E-H-W will send. The integer argument
Cayman 2E-H-W User's Guide
November 2000