Cayman Systems 2E-H-W User Manual page 49

Cayman 2E-H-W User's Guide
November 2000
Figure 3-11 Pinhole Configuration Window
To configure pinhole settings:
1. Enter the number identifying the port used by the
Cayman 2E-H-W to listen for Web-based configuration
connection requests in the Web-HTTP Port field.
If you set up a NAT pinhole for HTTP traffic (port 80), enter a
number other than 80 in this field.
After you have made this change, you will need to use this
port number to open a Web connection to the Cayman
2E-H-W. For example, if you change the Web-HTTP port to
1080 on a Cayman 2E-H-W using its default IP address
(
192.168.1.254
device by entering the URL
2. Enter the number identifying the port used by the router
to listen for Telnet-based configuration connection
requests in the Telnet Port field.
If you set up a NAT pinhole for Telnet traffic (port 23), enter a
number other than 23 in this field.
), you would open a web connection to the
http://192.168.1.254:1080
Configuring Your Cayman 2E-H-W
.
3-27