Cayman Systems 2E-H-W User Manual page 64

Using the Command Line Interface
4-6
example, the diagnostic utility indents the Check IP connect to
Ethernet (LAN) entry, since that test will not run if the Check
Ethernet LAN Connect test fails.
Each test generates one of the following result codes:
PASS The test was successful.
FAIL The test was unsuccessful.
SKIPPED The test was skipped because a test on which it
depended failed.
PENDING The test timed out without producing a result. Try
running the test again.
download [server_address] [filename] [confirm]
Copies the current configuration settings of the Cayman 2E-H-W
from a TFTP (Trivial File Transfer Protocol) server. The TFTP server
must be accessible on your Ethernet network.
You can include one or more of the following arguments with the
download command. If you omit arguments, the console prompts
you for this information.
The
server_address
TFTP server from which you want to copy the Cayman 2E-H-W
configuration file.
The argument identifies the path and name of the
filename
configuration file on the TFTP server.
If you include the optional
begins as soon as all information is entered.
install [server_address] [filename] [confirm]
Downloads a new version of the Cayman 2E-H-W operating software
from a TFTP (Trivial File Transfer Protocol) server, validates the
software image, and programs the image into the Cayman 2E-H-W
memory. After you install new operating software, you must restart
the Cayman 2E-H-W.
argument identifies the IP address of the
keyword, the download
confirm
Cayman 2E-H-W User's Guide
November 2000