Cayman Systems 2E-H-W User Manual page 67

Cayman 2E-H-W User's Guide
November 2000
The argument lets you specify the number of ICMP
-c count
packets generated for the ping request.
You can use the
ping
or IP address is already in use on your network. You cannot use the
command to ping the Cayman 2E-H-W's own IP address.
ping
quit
Exits the Cayman 2E-H-W command line interface.
reset arp
Clears the Address Resolution Protocol (ARP) cache on your Cayman
2E-H-W.
reset crash
Clears crash-dump information, which identifies the contents of the
Cayman 2E-H-W registers at the point of system malfunction.
reset dhcp client release
Releases the DHCP lease the Cayman 2E-H-W is currently using to
acquire the IP settings for its WAN (Ethernet B) port.
reset dhcp client renew
Renews the DHCP lease the Cayman 2E-H-W is currently using to
acquire the IP settings for its WAN (Ethernet B) port.
reset dhcp server
Clears the DHCP lease table in the Cayman 2E-H-W.
reset enet
Resets Ethernet statistics to zero.
reset ipmap
Clears the IP mapping table.
command to determine whether a hostname
Using the Command Line Interface
4-9