Cayman Systems 2E-H-W User Manual page 82

Using the Command Line Interface
4-24
set ip ethernet [ A | B ] proxy-arp { on | off }
Specifies whether you want the Cayman 2E-H-W to respond when
the it receives an address resolution protocol for devices behind it.
By default, proxy ARP is turned off.
set ip ethernet [ A | B ] rip-send { off | v1 | v2 |
v1-compat | v2-MD5 }
Specifies whether the Cayman 2E-H-W should use Routing
Information Protocol (RIP) broadcasts to advertise its routing tables
to other routers on your network. RIP Version 2 (RIP-2) is an
extension of the original Routing Information Protocol (RIP-1) that
expands the amount of useful information in the RIP packets. While
RIP-1 and RIP-2 share the same basic algorithms, RIP-2 supports
several new features, including inclusion of subnet masks in RIP
packets and implementation of multicasting instead of broadcasting
(which reduces the load on hosts which do not support routing
protocols. RIP-2 with MD5 authentication is an extension of RIP-2
that increases security by requiring an authentication key when
routes are advertised.
Depending on your network needs, you can configure your Cayman
2E-H-W to support RIP-1, RIP-2, or both.
set ip ethernet [ A | B ] rip-receive { off | v1 | v2 |
v1-compat | v2-MD5 }
Specifies whether the Cayman 2E-H-W should use Routing
Information Protocol (RIP) broadcasts to update its routing tables
with information received from other routers on your network.
set ip ethernet [ A | B ] rip-send-keyid keyid
Specifies the authentication key that will be included with all
outgoing RIP packets if
authentication key must match the key the remote router is
expecting, or the RIP update will be ignored. RIP authentication
keys can be 1-16 characters long, and can include spaces and special
characters. You must enclose the authentication key string in double
quotes ("").
is selected for
v2-MD5
Cayman 2E-H-W User's Guide
. This
rip-send
November 2000