Cayman Systems 2E-H-W User Manual page 57

Cayman 2E-H-W User's Guide
November 2000
Figure 3-14 SNMP Setup Window
To configure the SNMP settings for your Cayman 2E-H-W:
1. Enter information about the system contact in the System
Contact field.
For example, you might enter the name, phone number, beeper
number, or email address of the person responsible for the
Cayman 2E-H-W.
2. Enter information about the system location in the System
Location field.
For example, you might enter the building, floor, or room
number where the Cayman 2E-H-W is located.
3. Click the Save button to store your modified
configuration in the Cayman 2E-H-W memory.
4. If you want the Cayman 2E-H-W to use authentication
traps, click the Authentication Traps On radio button.
If SNMP trapping is enabled, your Cayman 2E-H-W sends
authentication traps to all SNMP trap destinations. You must
Configuring Your Cayman 2E-H-W
3-35