Using The Command Line Interface; Overview; Starting And Ending A Cli Session - Cayman Systems 2E-H-W User Manual

4

Overview

Starting and
Ending a CLI
Session
Cayman 2E-H-W User's Guide
November 2000
Using the Command
Line Interface
Overview
About Root Commands
About CONFIG Commands
CONFIG Commands
The Cayman 2E-H-W operating software includes a command line
interface (CLI) that lets you monitor and configure your Cayman
2E-H-W over a Telnet or console connection. You can use the
command line interface to enter and update a Cayman 2E-H-W's
configuration settings, monitor its performance, and restart it.
You can open a command line interface session by opening a Telnet
connection from a workstation on your network or by connecting a
terminal to the console port on the Cayman 2E-H-W.
Connecting from Telnet
You initiate a Telnet connection by issuing the following command
from an IP host that supports Telnet (or a personal computer running
a Telnet application such as NCSA Telnet).

Using the Command Line Interface

4-1