Cayman Systems 2E-H-W User Manual page 44

Configuring Your Cayman 2E-H-W
3-22
Figure 3-9 Ethernet Port B (PPPoE) Configuration Window
To configure settings for the WAN (Ethernet B) port:
1. Enter the identifier you want your Cayman 2E-H-W to
send when the PPP link is being established in the PPP
Username field.
This is the username the Cayman 2E-H-W sends in a PAP or CHAP
response packet. The information you enter must match the
CHAP username configured in the remote PPP peer's
authentication database.
2. Enter the password you want your Cayman 2E-H-W to
send when the PPP link is being established in the PPP
Password field.
This is the PAP password or CHAP secret the Cayman 2E-H-W
sends. The information you enter must match the PAP
password/CHAP secret configured in the remote PPP peer's
authentication database.
3. Specify whether you want the connection to be
maintained constantly or only when it is needed.
If you choose a connection type of Instant On, the Cayman
2E-H-W shuts down the PPP link if it is not being used for the
Cayman 2E-H-W User's Guide
November 2000