Cayman Systems 2E-H-W User Manual page 38

Configuring Your Cayman 2E-H-W
3-16
1. Enter the name of your Cayman 2E-H-W in the System
Name field.
Each Cayman 2E-H-W is assigned a name as part of its factory
initialization. The default name for a Cayman 2E-H-W consists of
the word "Cayman-2E" and the serial number of the device.
2. Enter the identifier for your Cayman 2E-H-W on your
HomeRF or 802.11 wireless network in the Wireless ID
field.
HomeRF wireless network – The default HomeRF wireless
ID for a Cayman 2E-H-W consists of two four-digit numbers,
which are located on the label on the bottom of your
Cayman 2E-H-W. You must configure other devices on your
wireless network to use this identifier before they can
communicate with your Cayman 2E-H-W.
802.11 wireless network – The default 802.11 wireless ID
for a Cayman 2E-H-W consists of the word "Cayman-2E" and
the serial number of the device. You must configure other
devices on your 802.11 wireless network to use this
identifier before they can communicate with your Cayman
2E-H-W.
3. Enter the login name you want your Cayman 2E-H-W to
send when the PPP link is being established in the PPP
Username field.
This is the username the Cayman 2E-H-W sends in a PAP or CHAP
response packet. The information you enter must match the
CHAP username configured in the remote PPP peer's
authentication database.
4. Enter the password you want your Cayman 2E-H-W to
send when the PPP link is being established in the PPP
Password field.
This is the PAP password or CHAP secret the Cayman 2E-H-W
sends. The information you enter must match the PAP
password/CHAP secret configured in the remote PPP peer's
authentication database.
Cayman 2E-H-W User's Guide
November 2000