Turning On Power For The First Time - Xilinx Spartan-3A DSP S3D1800A Getting Started

Chapter 2: Quick Start Guide

Turning on Power for the First Time

1.
2.
10
Turn the SW1 Power to the ON position.
a. The three red Power Supply LEDs, D16, D17 and D18, will light.
a. The red Reset LED, D6, will flash momentarily.
a. The blue DONE LED, D1, will turn on, and LEDs D7 through D14 will start to
"walk" an LED from right to left and then start to count in binary.
In the HyperTerminal, the following text will appear.
=============================================================
/ /\/
\ \
/ /
\_\/\
=============================================================
Walking the LEDs
Counting on the LEDs
Reading the DIP Switches
SW3 = 0x0
Testing a region of DDR2 SDRAM
Testing : 0x20000000 - 0x20ffffff
Writing pseudo-random data...0x20fd8000
Reading : 0x20fd8000
Total Errors = 0
Mem passed
*Press any key to continue
www.xilinx.com
Xilinx Spartan3A DSP 1800A
Hello World and Board Bringup Test
Getting Started SP-3A DSP S3D1800A
UG485 (v1.0) January 28, 2008
R