Programming The Stations; Using This Chapter; Set Up A Station; Assign Name To Station - Comdial DSU Programming Manual

4.1

Using This Chapter

Chapter Four deals only with the programming of the stations, which means that you are setting the parameters char
will only be true for rhe individual station programmed. If you are unsure whether or not you are programming the
correct function, check the features chapter of IMI66-107 for a full definition of the features. You should make a
record of all your programming decisions-it will help you keep track of what you have done and will help you
trouble-shoot any problem that might arise later. When you need to make a record of your programming decisions,
use the records sections provided in the back of this manual, or print out C.O.S. to printer port for a hard copy.
To enter Station Class of Service menu, press 3 on Main menu.
l
You can one station's parameters and copy them to other stations.
To Program:
1. .Rress lonStationmenuandRJTURN
2.
Enter Model Station Number and RETURN
3. Enter Program Station Number(s) and RETURN
4.
Press REl'URN to go back to previous menu
4.3

Assign Name To Station

You can assign individual names or category names to a station. These names will then be displayed by
LCD speakerphones when they are called by named stations.
1. Press 2 on Station menu and RJXURN
2.
Press 1 to Assign Name and RlTURN
3. Press 2 to Remove Name and RETURN
4 . Press 3 to return to previous menu

Programming The Stations