Comdial DSU Programming Manual page 42

4.8 Button Mapping
NOTE: For Button Locatbns and Function Attributes see page 51-5.5
You can assign (map) every programmable button on every electronic telephone. For more information on
button mapping see Ih4I66-107.
To Program:
1. Press 7 on Station menu and RETURN
2 . E n t e r StationNumber
3 . Select desired button (Press RETURN until button appears)
4 . Enter desired attribute and RETURN
5 . Enter next station or press CTRL C to return to main menu
4.9 Toll Restriction Administration
NOTE: For further ilrformation on Toll Resm*ctions, see the Toll Restriction module in this publication.
After you have created a toll table, you must assign it to the appropriate lines and stations.
1. Press 8 on Statiorrmenu and RETURN
2 . Press 1 for Toll Restriction Table Assignment and RETURN
3 . Press 2 for Night Mode Toll Restriction and RETURN
4 . Press 3 for System Speed Dial Toll Restriction and RETURN
5 . Press 4 for Toll Restriction Override
6.
Press 5 to retum to previous menu
The system can automatically forward busy and ring-no answer intercom calls or transfered outside calls
that callers make to one station to a different station for answering. The system sends these calls to any idle
station associated with an intercom hunt group or by department with the called station.
If
NOTE: you enable this
2.
a .
b .
c .
3.
a
b . Enter station number (s) and RETURN
4.
Return to previous menu
feature,
choose tone dialing when you program the system intercom signaling (See-2.3.1).
Press 1 to Enable and RETURN
Press 2 to Disable and RETURN
Press 3 to return to previous menu
for Call Forward RNA and RETURN
Enter number of rings and RETURN
of
this manual