Table of Contents
Advertisement
5.4 Toll Restriction-
This module explains the many different steps involved in programming for Toll Restrictions. It also serves as an
excellent example of the occasional need to move from one menu to another in order to completely program a
particular function. (If you are unsure about whether you have done all of the necessary programming for a
particular function, check the index-in the back of this book -for further references to that function.)
54.1 Create The Table
Step one is to create the Toll Table (See-5.1). From Main menu, press 4.
1. Build / Modify an Allow Table
Build /Modify a Deny Table
Clear a Table / Entry
5.4.2
Assign Toll Table To A Line
Once you have created the desired "Allow" and "Deny" Tables, you must assign them to the appropriate
line ( See-3.6). From Line Class of Service menu, press 5.
1. Press 1 to Clear Line Toll Restriction Table
5.4.3
Assign Toll Table To A Stuth
After assigning the toll table to a line, you must then assign it to the desired station (s) (Sd.9).
Station Class of Service menu, press 8.
1. Press 1 for Toll Restriction Table Assignment
2. Press 2 for Night Mode Toll Restriction
From
Advertisement
Table of Contents
