Comdial DSU Programming Manual page 41

4.7 Ringing Assignment
To enter Ringing Assignment menu, press 6 on Station menu.
l
4.7.1 Personal Ringing tone
Description
You can program stations to ring in one of six distinctive tones.
1. Press 1 on Ringing Assignment menu and RETURN
2.
Press 1 for Ringing tone 1 and REI'URN
3. Press 2 for Ringing tone 2 and RETURN
4. Press 3 for Ringing tone 3 and RETURN
5. Press 4 for Ringing tone 4 and RJTLJRN
6.
Press 5 for Ringing tone 5 and REI'UlW
7. Press 6 for Ringing tone 6 and RETURN
8. Press 7 to return to previous menu
4.7.2 Direct/Delayed Ringing
You must program ringing assignments on a per station basis. Direct ringing rings immediately at a station
and delayed ringing rings after a set interval of time.
To Program:
1. Press 2 on Ringing Assigmnent menu and RETURN
2 . Press 1 to Enable Direct Ringing and RETURN
3 . Press 2 to Disable Diit Ringing and RETURN
4. Press 3 to enable Delayed Ringing and RIZUTW
5. Press 4 to disable Delayed Ringing and RETURN
6.
4.7.3 Night Ringing
You must program ringing assignments on a per station basis. lhe system will activate special line/station
ringing assignments when set for night ringing.
To Program:
1. Press 3 on Ringing Assignment menu and RETURN
2 . Press 1 to Enable Night Ringing and RETURN
3 . Press 2 to Disable Night Ringing and RETURN
4. Press 3 to return to previous menu
4.7.4 Distinctive Ringing
Description
Intercom calls that ring at equipment connected through an ATI-D have a different cadence than outside
calls have. If needed, you can disable this distinctive ringing feature to make the intercom ring cadence the
same as that for outside calls.
1 . F'ress4andRETUFW
2 . Press 1 to Enable Distinctive Ringing and RETURN
3 .
for