(6) Please reboot the device to enable the setting.
(7) After rebooting, the GRP device will automatically connect to VxServer.
For more information about VxServer, please refer to
http://www.icpdas.com/en/product/guide+Software+Applications+VxServer
(8) After the GRP device is connected to VxServer, follow the steps below.
A. Open VxComm Utility
Note:
1. VxComm Utility version must be greater than v2.14.03.
2. For more information about VxComm Utility, please refer to
http://www.icpdas.com/en/product/guide+Software+Utility_Driver+VxComm__(Virt
ual__COM)#452
B. Press the "Search Servers" button to get the device list.
C. Right-click on "GRP-2841"
D. Click "Add Server".
GRP-2841M-5GE User Manual
Copyright © 2022 ICP DAS Co., Ltd. All Rights Reserved
Version 1.1.0
E-mail: service@icpdas.com
56
Page: