Table of Contents
Advertisement
6.3
Remote I/O Control / Temperature Monitor
This example shows the remote control application through "Serial port to 5G gateway
function".
(1) Connect the device (DL-100 or PLC) to the serial port of the GRP device.
(2) Open VxServer and VxComm Utility software.
(3) If necessary, fill in "PIN Code", "APN", "User Name" and "Password". After finishing all
the settings, click "Modify".
GRP-2841M-5GE User Manual
Copyright © 2022 ICP DAS Co., Ltd. All Rights Reserved
Version 1.1.0
E-mail: service@icpdas.com
53
Page：
Advertisement
Table of Contents
