ICP DAS USA GRP-2841M-5GE User Manual page 40

 Data Update Period (sec.):
 Heartbeat Period (sec.):
 Baud Rate (for Modbus/RTU):
 Data bit:
 Parity:
 Stop bit:
 Modbus Timeout (ms): Modbus communication timeout value.
 Enable Firmware:
 [1] The RTU center will detect the disconnection in advance and terminate the
connection. The "Heartbeat Period" must be less than "Data Update Period".
Modbus Number tab
 Modbus Device Number: The Modbus device number is displayed here.
GRP-2841M-5GE User Manual
Copyright © 2022 ICP DAS Co., Ltd. All Rights Reserved
The time interval for sending data
The time interval for sending heartbeat packet.
The baud rate of UART (COM1~3).
The data
The parity bit of UART (COM1~3).
The stop
Enable this feature.
Users can select a model in the list, and then click "Add" to
bit of UART (COM1~3).
bit of UART (COM1~3).
Version 1.1.0
E-mail: service@icpdas.com
packet.
[1]
40
Page：