Table of Contents
Advertisement
(8) Open the RTU Center, and then follow the steps below to add RTU devices.
A. Click the "New Device" icon.
B. Enter the alias of the GRP device
C. Fill in the "Station ID" as the "Station ID" of GRP device.
(9) After reboot, the GRP device will automatically connect to RTU Center.
(10) Double-click "ET-7050" to call up the "Output Control Panel", and press "DO1" to
control the remote DO.
GRP-2841M-5GE User Manual
Copyright © 2022 ICP DAS Co., Ltd. All Rights Reserved
Version 1.1.0
E-mail: service@icpdas.com
70
Page：
Advertisement
Table of Contents
