(6) Please reboot the device to enable the setting.
(7) After rebooting, the GRP device will automatically connect to VxServer.
(8) After the GRP device is connected to VxServer, user can connect to "127.53.0.1:10001"
and "127.53.0.1:10002" (port 10001 is RS-232; port 10002 is RS-485) to send/receive
Modbus RTU commands using Modbus TCP program.
GRP-2841M-5GE User Manual
Copyright © 2022 ICP DAS Co., Ltd. All Rights Reserved
Version 1.1.0
E-mail: service@icpdas.com
62
Page: