Performance Specifications - Fluke VT Plus HF Operator's Manual

Power Consumption ....................... <132 VA
Fuse Rating .................................... 0.5 A, Slo-Blo

Performance Specifications

Low-Pressure Port
Maximum Applied Pressure............. 60 psi
Operating Pressure ......................... (Differential) ±500 mmHg (±10 psi)
Span Accuracy ................................ ±0.80 % of reading or ±1.5 mmHg, whichever is greater
Frequency Response ...................... >10 Hz
Resolution........................................ 0.1 mmHg
Sample Rate ................................... 100 Hz
Fluid pressure may be applied to the positive port; however, fluids should
be kept from entering the pressure port by using a suitable length of
connection tubing.
High-Pressure Port
Maximum Applied Pressure............ 150 psi
Operating Pressure ........................ ±100 psi
Span Accuracy ............................... ±1 % of reading or ±0.3 psig, whichever is greater
Frequency Response ..................... >10 Hz
Resolution....................................... 0.1 psi
Sample Rate................................... 100 Hz
Fluid pressure may be applied to the positive port; however, fluids should
be kept from entering the pressure port by using a suitable length of
connection tubing.
Airway Pressure
Maximum Applied Pressure............. 20 psi
Operating Pressure ........................ ±120 cmH
Span Accuracy ............................... ±0.75 % of reading or r 0.5 cmH
Frequency Response ..................... >25 Hz or t10-90 <40 ms, whichever is greater
Resolution....................................... 0.1 cmH
Sample rate .................................... 100 Hz
Airway pressure is internally tapped off the proximal flow sensor port,
which is the port closest to the exhaust port on the Analyzer.
Continuous Flow
Low Flow ............................................... ±(2 % of reading and 1 % of range)
High Flow............................................... ±(2 % of reading and 1 % of range)
Volumetric Flow
High-Flow Port
Maximum Flow Rate........................ (absolute value) 500 lpm
Operating Flow Range.................... ±300 lpm
Accuracy......................................... ±2.0 % of range
Resolution....................................... 0.01 lpm
(Common-mode) 30 psi
Note
Note
O
2
O
2
Note
Introduction and Specifications
O, whichever is greater
2
1
Specifications
1-11