Penetration Of Moisture Into The Device; Disposal; Replacing The Antenna - Siemens SITRANS L Operating Instructions Manual

8.4

Penetration of moisture into the device

NOTICE
Penetration of moisture into the device
Damage to device.
• Make sure when carrying out cleaning and maintenance work that no moisture
8.5

Disposal

8.6

Replacing the antenna

• When a new antenna is installed the propagation factor will not change.
• After replacing the antenna check the material level reported by the device against the
actual material level, and if necessary use Sensor Offset (2.3.3.) (Page 96) to compensate.
SITRANS LR200 with PROFIBUS PA
Operating Instructions, 07/2021, A5E32337680-AF
penetrates the inside of the device.
Devices described in this manual should be recycled. They may not be
disposed of in the municipal waste disposal services according to the Di-
rective 2012/19/EC on waste electronic and electrical equipment (WEEE).
Devices can be returned to the supplier within the EC and UK, or to a local-
ly approved disposal service for eco-friendly recycling. Observe the specific
regulations valid in your country.
Further information about devices containing batteries can be found at:
Information about battery/product return (WEEE)
(https://support.industry.siemens.com/cs/document/109479891/)
Service and maintenance
8.4 Penetration of moisture into the device
141