Intellinet 560559 User Manual page 31

Parameter
Port GVRP
Ingress Check
Click Advanced Application > VLAN> VLAN Port Settings.
1.
The PVID of port 1 is set to 1, the frame type is set to All, the port mode is
2.
set to Hybrid, and the port GVRP is not turned on and the entry inspection
function is opened.
Click Apply.
3.
Web Smart Managed PoE Switches User Manual
Description
Hybrid: The port can be either a tagged member or untagged
member in the VLAN and can be a member port for multiple
VLANs. Used to connect switches to each other and to
computers.
Trunk: The port can only be a tagged member in the VLAN and
can be a member port for multiple VLANs.
connect switches to each other.
Access: port belongs to one VLAN. Common use is to connect
computer ports. The port can only be an untagged member in
the VLAN and the port can only be in one VLAN, not multiple.
Select enable or disable GVRP (a dynamic VLAN learning
function); port mode must be Trunk mode.
Enable port filtering function. If enabled, the port checks for a
tagged message. If the message is untagged, it is disregarded.
If disabled, all messages are allowed through.
【Configuration example】
31
Typically used to