Features And Terms Explained - Intellinet 560559 User Manual

PoE Management

5.2 Features and Terms Explained

VLAN
A Virtual Local Area Network, this allows network admins to maintain a virtual
network to optimize devices attached to the switch for better overall performance.
MAC Address Forwarding
The ability in Layer 2 networking to control network traffic based on MAC address
within VLANs.
Loopback Detection
Loopback Detection allows the switch to detect loops in the network (multiple
connections from one device to another). When a loop is detected on a port, the
switch will display an alert on the management interface and block the traffic on the
corresponding port.
Spanning Tree Protocol (STP)
Another form of loopback discovery and protection based upon the IEEE802.1D
standard.
Bandwidth Control
The ability to limit network traffic on a specific port of the switch on an inbound
and/or outbound basis.
Broadcast Storm Control
Storm control and equivalent protocols allow you to rate-limit broadcast packets.
Broadcast storm control is a feature of many managed switches in which the switch
intentionally ceases to forward all broadcast traffic if the bandwidth consumed by
incoming broadcast frames exceeds a designated configurable threshold.
Mirroring
The ability to duplicate network traffic from one port to another, on an inbound
and/or outbound basis.
Web Smart Managed PoE Switches User Manual
IGMP Snooping
SNMPV1, V2c, V3
RMON (1, 2, 3, 9)
PoE Status
Power supply management mode(auto/energy/static)
The port priority
95